Custom Spring Instant Quote

Acxess Spring has revolutionized the spring industry again with an Instant Spring Quote that provides you with a custom quote of your spring in real time using only your spring’s physical dimensions. We have fused this technology with Spring Creator, our powerful spring calculator. Simply use Spring Creator to generate a live spring design and receive an instant quote from which you can purchase your custom springs.

 

 

Since we have three spring calculators in one, we will provide you with instructions to generating a quote for each type. We will begin with a compression spring instant quote, then an extension spring instant quote, and, finally, with a torsion spring instant quote.

 

Compression Spring Instant Quote Instructions

 

Step One - Choose Your End Type

Our compression spring calculator provides you with four different end types to choose from.

-Closed and Squared

-Closed and Ground

-Double Closed

-Open

 

Step Two - Enter Your Spring’s Dimensions

Enter the following dimensions:

-Wire diameter

-Outer diameter

-Free length

-Number of active coils

-Material type

 

Quotable Dimension Ranges

Material Type: Music Wire ASTM A228 and Stainless Steel 302 A313 ONLY

Wire Diameter: 0.007” to 0.115”

Outer Diameter: 0.050” to 1.950”

Free Length: 0.130” to 90”

Coils: 1 to 500

Spring Index: 4 to 30

 

Formula for Spring Index

Mean Diameter ÷ Wire Diameter = Index

D ÷ d = I

 

Formula for Mean Diameter

Outer Diameter – Wire Diameter = Mean Diameter

Do – d = D

 

Step 3 - Choose a Quantity

After you’ve clicked on calculate, review your quote. If you don’t receive a quote you will be notified in the “warnings and helpful tips” section that it is because your dimension inputs didn’t meet the quotable dimension ranges provided above.

 

These are the four different quantity lots and the range of quantities in these different lots:

-Small Volume - 25 (NO LESS) to 250 pieces

-Medium Volume - 500 to 2,500 pieces

-Large Volume - 5,000 to 15,000 pieces

-High Volume - 20,000 and 25,000 pieces

 

Select the quantity you are interested in ordering by clicking on Buy Now! If the desired quantity is in between tiers, it is more economical to jump up to the next tier.

 

Although the highest quantity on the instant quote is of 25,000, you can get a quote on much higher quantities by requesting it on the section provided below the instant quote for a much better deal. Do you need 50,000 or 250,000 pieces? No problem! request a quote by filling out the quick quote form provided at the top right corner of the instant spring quote with your contact information and the quantities you would like to have quoted.

 

Please note that these instructions are for the instant quote only, if you want to learn more about how to use our compression spring calculator, click here.

 

Step 4 - Buy Now!

Once you’ve clicked on a part, you will be directed to your shopping cart where you may checkout or “continue shopping” and go back to the calculator to generate a different design to purchase.

 

Shopping Cart

-You will be able to adjust quantities or remove items you no longer want.

 

Checkout

-3 week standard lead time (could be less)

-Fill out personal data and contact information.

-You are able to use the same ship-to and bill-to address but you may also choose to use different ones.

-Select shipping method

-Pay with your credit card.

 

Note: You may look up a quote by quote number at the top of Spring Creator to make a purchase for a certain spring. Quote numbers are provided along with your spring blueprint.

 

You’re able to generate a live blueprint and email it to yourself or a comrade. This will include the live blueprint of your spring, the quote with the quote number, and a full spring analysis.

 

 

 

 

Extension Spring Instant Quote Instructions

 

Step One - Choose Your Hook Type

Our extension spring calculator provides you with five different hook types to choose from.

-Machine Hooks

-Cross Over Center Hooks

-Side Hooks/Loops

-No Hooks

-Extended Hooks

 

Step Two - Enter Your Spring’s Dimensions

Enter the following dimensions:

-Wire diameter

-Outer diameter

-Length inside hooks

-Material type

 

Quotable Dimension Ranges

Material Type: Music Wire ASTM A228 and Stainless Steel 302 A313 ONLY

Wire Diameter (No Hooks): 0.007” to 0.115”

Wire Diameter (Hooks): 0.015” to 0.050”

Outer Diameter: 0.050” to 1.950”

Length: 0.130” to 90”

Coils: 1 to 500

Spring Index: 4 to 30

 

Formula for Spring Index

Mean Diameter ÷ Wire Diameter = Index

D ÷ d = I

 

Formula for Mean Diameter

Outer Diameter – Wire Diameter = Mean Diameter

Do – d = D

 

Step 3 - Choose a Quantity

After you’ve clicked on calculate, review your quote. If you don’t receive a quote you will be notified in the “warnings and helpful tips” section that it is because your dimension inputs didn’t meet the quotable dimension ranges provided above.

These are the four different quantity lots and the range of quantities in these different lots:

-Small Volume - 25 (NO LESS) to 250 pieces

-Medium Volume - 500 to 2,500 pieces

-Large Volume - 5,000 to 15,000 pieces

-High Volume - 20,000 and 25,000 pieces

 

Select the quantity you are interested in ordering by clicking on Buy Now! If the desired quantity is in between tiers, it is more economical to jump up to the next tier.

 

Although the highest quantity on the instant quote is of 25,000, you can get a quote on much higher quantities by requesting it on the section provided below the instant quote for a much better deal. Do you need 50,000 or 250,000 pieces? No problem! request a quote by filling out the quick quote form provided at the bottom of the instant spring quote with your contact information and the quantities you would like to have quoted.

 

Please note that these instructions are for the instant quote only, if you want to learn more about how to use our extension spring calculator, click here.

 

Step 4 - Buy Now!

Once you’ve clicked on a quantity, you will be directed to your shopping cart where you may checkout or “continue shopping” and go back to the calculator to generate a different design to purchase.

 

To Purchase Your Springs

-You will be able to adjust quantities or remove items you no longer want.

-3 week standard lead time (could be less)

-Fill out personal data and contact information.

-You are able to use the same ship-to and bill-to address but you may also choose to use different ones.

-Pay with your credit card.

 

Note: You may look up a quote by quote number at the top of Spring Creator to make a purchase for a certain spring. Quote numbers are provided along with your spring blueprint.

 

You’re able to generate a live blueprint and email it to yourself or a comrade. This will include the live blueprint of your spring, the quote with the quote number, and a full spring analysis.

 

 

 

 

 

 

Torsion Spring Instant Quote Instructions

 

Step One - Choose Your Direction of Wind

Our torsion spring calculator lets you pick between these to wind directions.

-Left Hand Wound

-Right Hand Wound

 

Step Two - Enter Your Spring’s Dimensions

Enter the following dimensions:

-Wire diameter

-Outer diameter

-Total Coils

-Leg Lengths 1 and 2

-Material type

 

Quotable Dimension Ranges

Material Type: Music Wire ASTM A228 and Stainless Steel 302 A313 ONLY

Wire Diameter (with leg length no greater than 0.750): 0.008” to 0.033”

Wire Diameter (with leg length no greater than 1.750): 0.034” to 0.098”

Outer Diameter: 0.050” to 2.750”

Length: 0” to 90”

Coils: 1 to 500

Spring Index: 4 to 35

 

Formula for Spring Index

Mean Diameter ÷ Wire Diameter = Index

D ÷ d = I

 

Formula for Mean Diameter

Outer Diameter – Wire Diameter = Mean Diameter

Do – d = D

 

Step 3 - Choose a Quantity

After you’ve clicked on calculate, review your quote. If you don’t receive a quote you will be notified in the “warnings and helpful tips” section that it is because your dimension inputs didn’t meet the quotable dimension ranges provided above.

These are the four different quantity lots and the range of quantities in these different lots:

-Small Volume - 25 (NO LESS) to 250 pieces

-Medium Volume - 500 to 2,500 pieces

-Large Volume - 5,000 to 15,000 pieces

-High Volume - 20,000 and 25,000 pieces

 

Select the quantity you are interested in ordering by clicking on Buy Now! If the desired quantity is in between tiers, it is more economical to jump up to the next tier.

 

Although the highest quantity on the instant quote is of 25,000, you can get a quote on much higher quantities by requesting it on the section provided below the instant quote for a much better deal. Do you need 50,000 or 250,000 pieces? No problem! request a quote by filling out the quick quote form provided at the bottom of the instant spring quote with your contact information and the quantities you would like to have quoted.

 

Please note that these instructions are for the instant quote only, if you want to learn more about how to use our torsion spring calculator, click here.

 

Step 4 - Buy Now!

Once you’ve clicked on a quantity, you will be directed to your shopping cart where you may checkout or “continue shopping” and go back to the calculator to generate a different design to purchase.

 

To Purchase Your Springs

-You will be able to adjust quantities or remove items you no longer want.

-3 week standard lead time (could be less)

-Fill out personal data and contact information.

-You are able to use the same ship-to and bill-to address but you may also choose to use different ones.

-Pay with your credit card.

 

Note: You may look up a quote by quote number at the top of Spring Creator to make a purchase for a certain spring. Quote numbers are provided along with your spring blueprint.

 

You’re able to generate a live blueprint and email it to yourself or a comrade. This will include the live blueprint of your spring, the quote with the quote number, and a full spring analysis.

 

 

 

 

 

 

 

 

 

 

OR

 

 

 

 

 

 

 

OR

 

 

 

 

 

 

OR